TM 9--2350--292--20--2
0366 00--4
BRAKE SHAFT ASSEMBLY 12364824 AND BRAKE PEDAL RETURN SPRING
REPLACEMENT (OLD CONFIGURATION) -- CONTINUED
0366 00
Installation--Continued
7. Connect spring (1) to lever (6).
NOTE
Nut must be tight against end of threaded portion of eye
bolt prior to installation of support tube.
8. Install nut (7) and tube support (4) on eyebolt (5).
9. Connect spring (1) to eyebolt (5).
10. Install eyebolt (5), nut (7) and tube support (4) in vehicle bracket with new lockwasher (3) and nut (2).
11. Tighten nut (7) against vehicle bracket to secure eyebolt (5) in place.
12. Install rod assembly (13) on lever (14) with straight headed pin (12) and new cotter pin (11).
13. Perform brake linkage alignment (WP 0355 00 or WP 0356 00).
14. Adjust brake pedal locking rod (WP 0358 00).
Figure 168
1
2
3
7
4
5
6
11
12
13
14
NOTE
FOLLOW--ON MAINTENANCE:
Install subfloor plates #6, #13 and #16, if removed
(WP 0454 00)
END OF TASK