TM 9--2350--292--20--2
0692 00--3
TRANSDUCER CALIBRATION -- CONTINUED
0692 00
Calibration
1. Connect wiring harness 4W508 (1) connector P1 to remote terminal (RT) unit connector J6 (2).
2. Connect wiring harness 4W508 (1) connector P3 to SPORT 1553 data bus wire branch A (3).
3. Connect one end of SPORT power cable (4) (part number 54418/711967) to wiring harness 4W508 (1) connector
P2 and other end to SPORT power connector (5).
4. Turn vehicle MASTER switch ON (TM 9--2350--292--10).
5. Turn RT unit circuit breaker switch (6) ON. Power light (7) will indicate RT unit is powered up.
6. Turn on SPORT.
FORWARD
1
2
6
7
3
4
5