TM 9--2350--292--20--2
0694 00--1
MECHANICAL SPEEDOMETER, SHAFT ASSEMBLY, GEAR ASSEMBLY,
HOUSING AND RELATED PARTS REPLACEMENT
0694 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (4) (item 14, WP 0718 00)
Lockwashers (5) (item 13, WP 0718 00)
Materials/Parts (continued)
Nonelectrical wire (item 349, WP 0718 00)
Lockwasher (item 58, WP 0718 00)
Equipment Conditions
Gauge panel removed (WP 0243 00)
Main winch and spade removed (WP 0497 00)
Removal
1. Disconnect shaft assembly (1) from mechanical speedometer (2).
2. Remove two nuts (3), two lockwashers (4) and mechanical speedometer (2) from gauge panel (5). Retain attach-
ing hardware for installation.
3. Remove four screws (6), four lockwashers (7) and four clamps (8) securing shaft assembly (1) to vehicle hull.
Discard lockwashers.
4. Disconnect shaft assembly (1) from gear assembly (9).
5. Remove two screws (10), two lockwashers (11) and gear assembly (9) from housing (12). Discard lockwashers.
6. Remove nonelectrical wire (13), four screws (14), four lockwashers (15) and housing (12) from vehicle hull. Dis-
card nonelectrical wire and lockwashers.
7. Inspect parts for damage and replace as required.
1
2
3
4
5
6
6
7
7
8
8
9
11
10
13
15
12
14
6
7
8
7
6
8