TM 9--2350--292--20--2
BRAKE SHAFTS 12364630 AND 12364780 REPLACEMENT -- CONTINUED
0368 00
Installation--Continued
7. Install two yokes (5) on two levers (9 and 10) with two straight headed pins (8) and two new cotter pins (7).
8. Install three lubrication fittings (6) in three grooved headed pins (2).
9. Install plate (3) on brake cable (4) and two yokes (5) with three grooved headed pins (2) and three new cotter pins
(1).
10. Perform brake control alignment (WP 0355 00 or WP 0356 00).
11. Install two rear brake rod assemblies (13) on two levers (14 and 15) with two straight headed pins (12) and two
new cotter pins (11).
12. Perform brake control adjustment (WP 0355 00 or WP 0356 00).
13. Lubricate brake system (WP 0187 00).
Figure 169
1
1
1
2
2
3
4
5
5
6
6
7
7
8
8
9
10
12
11
13
12
11
13
14
15
NOTE
FOLLOW--ON MAINTENANCE:
Install powerpack (WP 0188 00)
END OF TASK
0368 00--5/6 blank