TM 9--2350--292--20--2
M2A2 GAS PARTICULATE FILTER UNIT (GPFU), HOSE ASSEMBLIES,
FRAME ASSEMBLIES, BRACKETS, LEAD ASSEMBLY 4W303 AND
ASSOCIATED HARDWARE REPLACEMENT -- CONTINUED
0706 00
Installation--Continued
20. Connect loose end of hose assembly (13) on gas particulate filter unit (3).
21. Install three wire rope assemblies (9) on three orifice connectors (8), if removed.
22. Install three clamps (10) and three wire rope assemblies (9) on bracket on vehicle wall with three screws (11) and three
new lockwashers (12).
23. Connect one end of three hoses (7) to M2A2 gas particulate filter unit (3) and secure the other ends of three hoses (7)
with three wire rope assemblies (9) and three orifice connectors (8) in three clamps (10).
24. Install lead assembly 4W303 (6) on M2A2 gas particulate filter unit (3) with screw (4) and new lockwasher (5).
25. Connect wiring harness 4W307 connector P2 (1) to connector J1 (2) at M2A2 gas particulate filter unit (3).
Figure 373
1
10
12
11
8
9
7
8
2
3
5
4
6
7
13
9
9
NOTE
FOLLOW--ON MAINTENANCE:
Connect battery power (WP 0256 00)
Check operation gas particulate filter unit
(TM 9--2350--292--10)
END OF TASK
0706 00--9/10 blank