INTRODUCTION FOR MAINTENANCE ALLOCATION CHART -- CONTINUED
EXPLANATION OF COLUMNS IN THE MAC, TABLE 1 (WP 0715 00) -- CONTINUED
e. Column 5, Tools and Test Equipment Reference Code. Column 5 specifies, by code, those common tools
sets (not individual tools), common TMDE, and special tools, special TMDE, and special support equipment required
to perform the designated function. Codes are keyed to tools and test equipment in Table 2.
f. Column 6, Remarks. When applicable, this column contains a letter code, in alphabetical order, which is
keyed to the remarks contained in Table 3.
EXPLANATION OF COLUMNS IN THE TOOL AND TEST EQUIPMENT REQUIREMENTS,
TABLE 2 (WP 0715 00)
a. Column 1, Reference Code. The tool and test equipment reference code correlates with a code used in the
MAC, Table 1, Column 5.
b. Column 2, Maintenance Level. The lowest level of maintenance authorized to use the tool or test equipment.
c. Column 3, Nomenclature. Name or identification of the tool or test equipment.
d. Column 4, National Stock Number. The National Stock Number of the tool or test equipment.
e. Column 5, Tool Number. The manufacturers part number, model number, or type number.
5This maintenance level is not included in Table 1, column (4) of the Maintenance Allocation Chart. Functions to
this level of maintenance are identified by a work--time figure in the H column of Table 1, column (4), and an associ-
ated reference code is used in the Remarks column (6). This code is keyed to Table 3, Remarks, and the SRA com-
plete repair application is explained there.
EXPLANATION OF COLUMNS IN REMARKS, TABLE 3 (WP 0715 00)
a. Column 1, Remarks Code. The code recorded in column 6, Table 1.
b. Column 2, Remarks. This column lists information pertinent to the maintenance function being performed as
indicated in the MAC, Table 1.
END OF TASK
0714 00--3/4 blank