TM 9--2350--292--20--2
0370 00--4
BRAKE HYDRAULIC CYLINDER REPLACEMENT (OLD CONFIGURATION) --
CONTINUED
0370 00
Installation -- Continued
10. Apply a thin even coat of clean lubricant to two new preformed packings (3).
11. Install swivel adapter (2) with new preformed packing (3) on hydraulic cylinder (4).
12. Connect hose assembly (1) to swivel adapter (2).
13. Lubricate brake cable assembly (8) (WP 0187 00).
14. Perform alignment procedure (WP 0355 00 or WP 0356 00).
15. Bleed air from brake system (WP 0355 00 or WP 0356 00).
Figure 167
2
3
4
1
8
NOTE
FOLLOW--ON MAINTENANCE:
Install subfloor plates #13 and #16 (WP 0454 00)
END OF TASK