TM 9--2350--292--20--2
0371 00--4
BRAKE HYDRAULIC CYLINDER REPLACEMENT (NEW CONFIGURATION
WITH BRAKE MODULATION) -- CONTINUED
0371 00
Installation -- Continued
9. Apply a thin even coat of clean lubricant to two new preformed packings (3).
10. Install swivel adapter (2) with new preformed packing (3) on hydraulic cylinder (4).
11. Connect hose assembly (1) to swivel adapter (2).
12. Lubricate brake cable assembly (8) (WP 0187 00).
13. Perform alignment procedure (WP 0357 00).
14. Bleed air from brake system (WP 0357 00).
4
8
1
2
3
NOTE
FOLLOW--ON MAINTENANCE:
Install subfloor plates #13 and #16 (WP 0454 00)
END OF TASK