TM 9--2350--292--20--2
0377 00--1
BRAKE MODULATION VALVE ASSEMBLY AND BRAKE PEDAL REPAIR
(NEW CONFIGURATION WITH BRAKE MODULATION)
0377 00
THIS WORK PACKAGE COVERS:
Removal, Disassembly, Assembly, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (4) (item 9, WP 0718 00)
Lockwashers (9) (item 2, WP 0718 00)
Equipment Conditions
Vehicle parked on level surface with tracks blocked
and brakes released (TM 9--2350--292--10)
Subfloor plate #7 removed (WP 0454 00)
Brake assembly cover removed (WP 0362 00)
Hydraulic hoses disconnected from modulating valve
assembly (WP 0362 00)
References
TM 9--2350--292--10
WARNING
Do not work on hydraulic lines or fittings when system is
pressurized. Hydraulic fluid under pressure can cause
personnel injury. Depressurize brake system by stepping
on the brake pedal several times to bleed off the hydrau-
lic pressure. Make sure brake pressure gauge indicates
zero.
Removal
Remove four screws (1), four washers (2), and four lockwashers (3) and base mounting (4) from vehicle. Discard
lockwashers.
Disassembly
1. Remove two screws (5), two lockwashers (6), and modulating valve (7) from base mounting (4). Discard lock-
washers.
5
6
1
2
3
4
7