TM 9--2350--292--20--2
0391 00--3
TRACK SUPPORT ROLLER REPAIR -- CONTINUED
0391 00
Removal--Continued
8. Straighten edges of flat washer (12).
9. Remove nut (13), flat washer (12) and flat washer (14). Discard flat washer (12).
NOTE
Bearing and cup must be replaced as an assembly. If
either bearing or cup is damaged, bearing and cup must
be replaced.
10. Remove nut (15), outer bearing (16) and support roller assembly (10).
11. Remove inner bearing (17), seal (18) using seal inserter set and remover and replacer handle and dirt deflector
(19) from bracket (20). Discard seal.
12. Remove four screws (21), four lockwashers (22) and bracket (20). Discard lockwashers.
Figure 182
20
22
21
19
18
17
10
16
15
14
12
13