TM 9--2350--292--20--2
0345 00--2
TRANSMISSION OIL COOLER LINES REPLACEMENT -- CONTINUED
0345 00
Removal--Continued
2. Remove two self--locking nuts (5), two flat washers (6), two screws (7), two clamps (8), and shim(s) (9) from two
right side oil cooler lines (10). Discard two self--locking nuts.
NOTE
For removal of right side oil cooler lines bracket use exist-
ing transmission hardware.
Note the quantity and position of shim(s) being removed
to ensure shim(s) are installed in the same position.
3. Remove two screws (11), two lockwashers (12) and bracket (13). Discard lockwashers.
4. Disconnect coupling nut (14) at each of two tees (2) and coupling nut (15) on opposite end of two right side oil
cooler lines (10). Remove right side oil cooler lines (10).
Figure 157
POWERPACK REMOVED FOR CLARITY
7
7
8
8
11
12
5
5
6
6
13
9
10
10
15
15
14
14
2
2
11
12
9