TM 9--2350--292--20--2
0406 00--5
SHIFTING CONTROL LINKAGE (CREW COMPARTMENT) REPAIR --
CONTINUED
0406 00
Assembly
NOTE
All tubes, threaded rods and connecting link assemblies
are assembled in the same manner.
Do not tighten nuts on tubes, threaded rods or connecting
link assemblies during assembly, nuts will be tightened
during adjustment.
1. Install two nuts (47) on tube, threaded rod or connecting link (48).
2. Install two bearings or clevis (49) on tube, threaded rod or connecting link (48).
3. Install two bearing units (17) on shift shaft (18), tighten four set screws (46).
4. Install two lubrication fittings (19) on two bearing units (17).
5. Install two woodruff keys (45) and two remote control levers (9 and 12) on shift shaft (18) with two screws (43)
and two new lockwashers (44).
6. Install stud assembly (13) on remote control lever (29) with screw (41) and new lockwasher (42).
Figure 192
49
47
48
47
49
9
44
45
19
19
18
43
44
12
45
41
42
13
29
17
17
46
46
43