TM 9--2350--292--20--2
0407 00--2
SHIFTING CONTROL LINKAGE (ENGINE COMPARTMENT) REPAIR --
CONTINUED
0407 00
Removal
WARNING
Vehicle can move when shifting linkage is disconnecte-
Park vehicle on level ground and block vehicle tracks.
Failure to comply may result in personnel death or injury
or damage to the equipment.
1. Remove screw (1) and lockwasher (2), disconnect threaded rod assembly (3) from connecting link assembly (4).
Discard lockwasher.
2. Loosen clamp (5) securing bellows (6) and bushing (7) to threaded rod assembly (3).
3. Remove screw (8), lockwasher (9) and threaded rod assembly (3) from bell crank (10). Discard lockwasher.
4. Remove bellows (6) from bulkhead and bushing (7) and clamp (5) from threaded rod assembly (3).
5. Remove screw (11) and lockwasher (12), disconnect stud assembly (13) from bell crank (10). Discard lockwash-
er.
6. Remove bolt (14), bell crank (10), lockwasher (15) and flat washer (16) from vehicle hull. Discard lockwasher.
7. Remove lubrication fitting (17) from bolt (14).
8. Remove screw (18), lockwasher (19) and stud assembly (13) from bell crank (20). Discard lockwasher.
Figure 193
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
FORWARD