TM 9--2350--292--20--2
0424 00--1
CENTER EXHAUST DOOR AND HOLD OPEN LATCH REPLACEMENT
0424 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Suitable lifting device (200 lbs (90.8 kg) min cap)
Endless sling (item 24, WP 0717 00)
Materials/Parts
Cotter pins (4) (item 17, WP 0718 00)
Spring pin (item 201, WP 0718 00)
Personnel Required
Three
NOTE
There are two center exhaust doors. Replacement of
both doors are the same. This task replaces only one.
Perform Removal steps 3 and 4 and Installation step 1 for
maintenance of hold open latch.
Removal
WARNING
1. Attach endless sling and suitable lifting device to exhaust door (1).
2. Remove two cotter pins (2), two flat washers (3), two headed pins (4) and exhaust door (1) from engine deck as-
sembly (5). Discard cotter pins.
3. Remove two cotter pins (6), headless pin (7), spring (8) and latch (9) from engine deck assembly (5). Discard cot-
ter pins.
4. Inspect parts for damage and replace as required.
Figure 204
6
7
8
9
4
1
3
2
5