TM 9--2350--292--20--2
0431 00--7
LEFT PERSONNEL DOOR ASSEMBLY AND TORSION BAR REPAIR --
CONTINUED
0431 00
Assembly--Continued
11. Apply lubricant to four screws (10).
12. Assemble two hinges (17), tube (16), cam (14), two hinges (12 and 13) and install to door (3) with four screws
(10) and four flat washers (11).
13. Torque four screws (10) to 95--105 lb--ft (129--142.4 NSm).
14. Remove paint from both ends of tube (16).
15. Apply lubricant to both ends of tube (16).
NOTE
Align torsion bar splines with splines in top hinge.
16. Install torsion bar (15) into tube (16).
17. Install torsion bar cap (18).
Figure 208
12
3
15
14
16
18
11
10
13
11
10
17
17