TM 9--2350--292--20--2
0432 00--3
RIGHT PERSONNEL DOOR ASSEMBLY AND TORSION BAR REPAIR --
CONTINUED
0432 00
Disassembly
CAUTION
To prevent equipment damage, do not strike tube ends
with hammer.
NOTE
Stabilize personnel door as torsion bar is removed.
Cam, torsion bar, tube and hinges should be removed
from door as an assembly.
1. Remove four screws (10), four flat washers (11), two hinges (12 and 13), cam (14), torsion bar (15), tube (16) and
two hinges (17) as an assembly from personnel door assembly (3).
2. Remove cam (14) and torsion bar (15) from tube (16).
3. Remove hinges (12, 13 and 17) from tube (16).
4. Remove torsion bar cap (18).
Figure 208
3
14
15
16
18
17
11
17
11
10
10
12
13