TM 9--2350--292--20--2
0437 00--1
FUEL DOOR ASSEMBLY REPAIR
0437 00
THIS WORK PACKAGE COVERS:
Removal, Disassembly, Assembly, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Endless sling (item 24, WP 0717 00)
Suitable lifting device (200 lbs (90.8 kg) min cap)
Portable electric drill (item 11, WP 0717 00)
Twist drill set (item 12, WP 0717 00)
Materials/Parts
Cotter pins (3) (item 5, WP 0718 00)
Spring washer (item 165, WP 0718 00)
Self--locking nuts (4) (item 120, WP 0718 00)
Rubber strip (item 166, WP 0718 00)
Rubber based adhesive (item 15, WP 0716 00)
Dry--cleaning solvent (item 1, WP 0716 00)
Drive screws (6) (item 1, WP 0718 00)
Equipment Conditions
Fuel door opened (TM 9--2350--292--10)
Personnel Required
Three
References
TM 9--2350--292--10
Removal
1. Attach endless sling and suitable lifting device to fuel door assembly (1).
WARNING
NOTE
Stabilize fuel door as mounting hardware is removed.
2. Remove two cotter pins (2), two flat washers (3), two headed pins (4) and fuel door assembly (1) from hull. Dis-
card cotter pins.
Figure 216
4
2
3
1