TM 9--2350--292--20--2
0445 00--4
COMMANDERS CUPOLA DOOR ASSEMBLY REPAIR -- CONTINUED
0445 00
Installation
1. Position cupola door (1) on ring assembly (9) in vertical position using endless sling and suitable lifting device.
2. Install six springs (8), tube (7), two bearings (6) and two adapters (5) on ring assembly (9).
3. Install two cap assemblies (4) with eight screws (2) and eight new lockwashers (3) on cupola door (1).
4. Close cupola door (1).
5. Lubricate commanders cupola door assembly (WP 0187 00).
Figure 223
1
2
3
4
5
5
6
6
7
8
9
2
3
4
END OF TASK