TM 9--2350--292--20--2
0448 00--2
PERSONNEL AND MECHANICS CAB TOP DOOR ASSEMBLY REPAIR --
CONTINUED
0448 00
Removal--Continued
3. Remove two self--locking nuts (2), control pin (4), flat washer (5) and control arm (6) from shaft housing assembly
(3). Discard self--locking nuts.
4. Using endless sling and suitable lifting device, remove cab top door (1) from shaft housing assembly (3).
5. Remove five screws (7), five lockwashers (8) and shaft housing assembly (3) from hull. Discard lockwashers.
Figure 228
1
2
5
6
4
2
8
7
3