TM 9--2350--292--20--2
0448 00--3
PERSONNEL AND MECHANICS CAB TOP DOOR ASSEMBLY REPAIR --
CONTINUED
0448 00
Disassembly
1. Remove door rubber strip (9) from cab top door (1). Discard door rubber strip.
2. Remove adjusting screw (10) and self--locking nut (11) from control arm (6). Discard self--locking nut.
3. Remove cotter pin (12), flat washer (13), pin (14), retaining latch (15) and spring (16). Discard cotter pin.
4. Remove spring (17) from shaft housing assembly (3).
WARNING
5. Remove retaining ring (18), retainer (19), bearing (20) and disc (21). Discard retaining ring.
NOTE
Cushioning pad is found only on the shaft housing of the
personnel cab top door.
6. Remove retaining ring (22), two bushings (23), seal (24) and cushioning pad (25) from shaft housing (26). Dis-
card retaining ring, seal and cushioning pad.
Figure 228
21
20
19
18
22
23
24
17
3
9
1
10
25
13
11
6
23
14
12
16
15
26