TM 9--2350--292--20--2
0448 00--6
PERSONNEL AND MECHANICS CAB TOP DOOR ASSEMBLY REPAIR --
CONTINUED
0448 00
Assembly--Continued
6. Install spring (17) in shaft housing assembly (3).
7. Install spring (16), retaining latch (15), pin (14), flat washer (13) and new cotter pin (12).
8. Install adjusting screw (10) and new self--locking nut (11) on control arm (6).
WARNING
9. Clean door seal mating surfaces with dry--cleaning solvent.
10. Apply rubber based adhesive to new door seal (9) and seal mating surface on cab top door (1).
11. Install new door seal (9) on cab top door (1).
Figure 228
17
9
1
10
6
14
12
15
13
3
16
11