TM 9--2350--292--20--2
DRAIN COVERS AND GASKET REPLACEMENT
0453 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (18) (item 52, WP 0718 00)
Gasket (item 238, WP 0718 00)
Gasket (item 326, WP 0718 00)
Gasket (item 327, WP 0718 00)
Sealing compound (item 42, WP 0716 00)
Dry--cleaning solvent (item 1, WP 0716 00)
Equipment Conditions
Vehicle parked on level ground and tracks blocked
(TM 9--2350--292--10)
References
TM 9--2350--292--10
Removal
NOTE
All drain covers are removed and installed in the same
manner.
1. Remove six screws (1), six lockwashers (2), drain cover (3, 4 or 5) and gasket (6, 7 or 8) from vehicle hull. Dis-
card lockwashers and gasket.
2. Inspect parts for damage and replace as required.
Installation
WARNING
1. Clean threads and cap of six screws (1) with dry--cleaning solvent.
2. Apply sealing compound to threads and cap of six screws (1).
3. Install drain cover (3, 4 or 5) with new gasket (6, 7 or 8) on vehicle hull with six screws (1) and six new lockwash-
ers (2).
Figure 231
BOTTOM VIEW OF VEHICLE
FORWARD
1
1
1
2
2
2
3
4
5
6
7
8
END OF TASK
0453 00--1/2 blank