TM 9--2350--292--20--2
0506 00--1
MAIN WINCH AND CABLE GUIDE SYNCHRONIZATION ADJUSTMENT
0506 00
THIS WORK PACKAGE COVERS:
Adjustment
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit
(item 1, WP 0717 00)
Main winch ground hop kit
(item 26, WP 0717 00 or item 128, WP 0717 00)
Combination square (item 74, WP 0717 00)
Steel rule (item 73, WP 0717 00)
Materials/Parts
Black paint (item 60, WP 0716 00)
Wiping rag (item 7, WP 0716 00)
Equipment Conditions
Diamond screw centered (WP 0504 00)
Main winch drum and diamond screw
synchronized (WP 0505 00).
Personnel Required
Two
Adjustment
NOTE
Cable guide must be moving toward center of winch when upper
plate guide and cable guide timing marks are aligned.
1. Ensure timing marks on drum flange (1) and motor end winch housing (2) align.
2. Using a steel rule (3) and combination square (4), measure at top of winch, the distance from outside of motor
end winch housing (5) to offset in drum (6). Offset occurs at beginning of rope grooves.
3. Subtract 0.25 inch (6.35 mm) from distance determined in step 2.
Figure 262
STEP 2
1
2
3
4
5
6