TM 9--2350--292--20--2
0537 00--1
FUEL CONTROL VALVE DATA PLATE REPLACEMENT
0537 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Electric portable drill (item 11, WP 0717 00)
Twist drill set (item 12, WP 0717 00)
Materials/Parts
Drive screws (22) (item 1, WP 0718 00)
NOTE
The procedures are the same for all data plates. One
data plate of the five covered in this procedure requires
six drive screws to be replaced.
Removal
1. Remove heads from four or six drive screws (1). Discard drive screws.
2. Remove data plate (2, 3, 4, 5 or 6) from bulkhead.
3. Drill out four or six drive screw (1) shanks.
4. Inspect parts for damage and replace as required.
Figure 288
3
5
6
2
1
1
1
1
FORWARD
4
1