TM 9--2350--292--20--2
SPADE RELEASE DATA PLATE REPLACEMENT
0540 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Electric portable drill (item 11, WP 0717 00)
Twist drill set (item 12, WP 0717 00)
Materials/Parts
Drive screws (4) (item 1, WP 0718 00)
Removal
1. Remove heads from four drive screws (1). Discard drive screws.
2. Remove data plate (2) from bracket (3).
3. Drill out four drive screw (1) shanks.
4. Inspect parts for damage and replace as required.
Installation
Position data plate (2) over mounting holes in bracket (3), install four new drive screws (1).
Figure 304
1
3
2
END OF TASK
0540 00--1/2 blank