TM 9--2350--292--20--2
0563 00--1
BOOM LIMIT VALVE ADJUSTMENT
0563 00
THIS WORK PACKAGE COVERS:
Adjustment
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Equipment Conditions
Boom in stowed position
(TM 9--2350--292--10)
Engine deck grilles removed (WP 0417 00)
Personnel Required
Two
References
TM 9--2350--292--10
NOTE
Left and right boom limit valves are adjusted in the same
manner.
During adjustment, valve lever roller must ride squarely
and freely on upper side of cam follower bracket.
Adjustment
1. Loosen two screws (1) to adjust valve lever roller (2) on cam follower bracket (3).
2. If necessary, loosen jamnuts (4) and adjust screws (5) to position lever roller (2).