TM 9--2350--292--20--2
HYDRAULIC CONNECTION PANEL REPLACEMENT
0585 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (10) (item 9, WP 0718 00)
Gasket (item 288, WP 0718 00)
Equipment Conditions
Hydraulic lines and fittings removed from hydraulic
connection panel (WP 0568 00, WP 0566 00, WP
0571 00, WP 0577 00, WP 0578 00, WP 0580 00 and
WP 0581 00)
Subfloor plates #23, #31 and #32 removed
(WP 0454 00)
Removal
1. Remove adapter (1) from hull.
2. Remove 10 screws (2), 10 lockwashers (3), connector panel (4) and gasket (5) from hull. Discard lockwashers
and gasket.
3. Inspect parts for damage and replace as required.
Installation
1. Install new gasket (5) and connector panel (4) on hull with 10 screws (2) and 10 new lockwashers (3).
2. Install adapter (1) in hull.
Figure 330
1
2
3
4
5
FORWARD
NOTE
FOLLOW--ON MAINTENANCE:
Install hydraulic lines and fittings on hydraulic connector
panel (WP 0568 00, WP 0566 00, WP 0571 00,
WP 0577 00, WP 0578 00, WP 0580 00 and
WP 0581 00)
Install subfloor plates #23, #31 and #32 (WP 0454 00)
END OF TASK
0585 00--1/2 blank