TM 9--2350--292--20--2
0616 00--1
AUXILIARY POWER UNIT FUEL/WATER SEPARATOR REPLACEMENT
(HATZ)
0616 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Materials/Parts
Sealing compound (item 16, WP 0716 00)
Adhesive (item 29, WP 0716 00)
Lockwashers (2) (item 9, WP 0718 00)
Equipment Conditions
APU assembly removed (WP 0587 00)
Removal
1. Loosen clamp (1) and remove hose (2) with fitting (3) from elbow (4) of upper fuel pump (5).
2. Remove two screws (6), two lockwashers (7) and fuel/water separator (8). Discard lockwashers.
3. Remove quick--disconnect coupling half (9), hose (10) and elbow (11) from inlet side #3 of fuel/water separator
(8).
4. Loosen clamp (12) and remove hose (2) with fitting (13) from fuel/water separator (8).
5. Inspect all parts and replace as required.
8
6
7
9
10
11
13
12
5
3
4
2
1