TM 9-2350-256-34
0086 00
Table 1. Tool Identification ListContinued
ITEM NO.
ITEM NAME
NSN
P/N
REFERENCE
8
Fixture. Connecting track.
5120-01-016-2149
12252120
TM 9-2350-256-24P-1
9
10884612
TM 9-2350-256-24P-2
Gage. Checking main winch
system pressure, hoist winch
system pressure, spade
system pressure, boom
system pressure, or auxiliary
hydraulic system pressure.
10
Gage. Used with bushing
7950330
TM 9-2350-256-24P-2
144035 to check power
takeoff lubricating oil
pressure and power takeoff
clutch oil pressure.
11
Gage, alignment. Aligning
11671961
TM 9-2350-256-24P-1
APU drive sprocket.
12
10884600
TM 9-2350-256-24P-2
Guide, spade shaft. Used
with handle 10867499 to
install spade shaft through
oil seal.
13
Handle, spade shaft guide.
4910-00-766-1964
10867499
TM 9-2350-256-24P-2
Used with guide 10884600.
14
11671580-1
TM 9-2350-256-24P-1
Hose assembly, nonmetallic.
Test run APU outside
vehicle; fuel tank to fuel
pump line and fuel filter to
injection pump line (2 per
operation).
15
Hose assembly, nonmetallic.
11671580-2
TM 9-2350-256-24P-1
Test run APU outside
vehicle; engine to fuel tank
return line 11671065-15 and
fuel pump hose 11671065-22
to primary fuel filter (2 per
operation).
16
11671580-3
TM 9-2350-256-24P-1
Hose assembly, nonmetallic.
Test run APU outside
vehicle; hydraulic pump
section line from bulkhead
coupling to suction line
11671065-21.
17
Hose assembly, nonmetallic.
11671580-4
TM 9-2350-256-24P-1
Test run APU outside
vehicle; pressure switch line
hydraulic pump to pressure
line 11671065-16.
0086 00-2