TM 1-1680-320-13&P
0039 00
Group
Component/Assembly
Number
Description
04
POWER PLANT
0401
ENGINE, GENERAL
Servicing, handling inspection requirements, overhaul and retirement schedules. External lines
and hoses. (As applicable)
0402
COMPRESSOR SECTION (COLD SECTION MODULE)
Rotor, blades, vanes, impeller, stators, inlet guide vanes, mainframe, particle separator, bleed
valve, bearings, seals, external lines, and hoses.
0403
COMBUSTION SECTION (HOT SECTION MODULE)
Liners, nozzles, stators, rotor, seals, couplings, and blades.
0404
POWER-TURBINE (POWER TURBINE MODULE)
lines, and hoses.
0405
ACCESSORY GEAR BOX (ACCESSORY SECTION MODULE)
0406
FUEL SYSTEM
Fuel control, fuel boost pump, governors, fuel filter assembly, sequence valve, fuel manifold,
fuel nozzle, external lines, and hoses.
0407
ELECTRICAL SYSTEM
Electrical control units, exciters, thermocouples, ignition harness, electrical cables, history
record, torque over speed sensor, Np sensor, external lines, and hoses.
0408
OIL SYSTEM
Tanks, oil filter, oil cooler, lube and scavenger pumps, oil filter bypass sensor, external lines,
and hoses.
Maintenance Function. Entry lists the functions to be performed on the items listed in Component/Assembly.
Maintenance Level. The maintenance levels field and sustainment are listed on the MAC with individual columns
for AMC, ASB, TASMG, and Depot that include the work times for maintenance functions at each maintenance
level. Work time presentations such as "0.1" indicate the average time (expressed in manhours in whole hours or
decimals) it requires a maintenance level to perform a specified maintenance function. If a work time has not been
established, the columnar presentation will indicate "--". Maintenance levels higher than the level of maintenance
indicated are authorized to perform the indicated function.
Tools and Equipment Reference Code. Entry specifies, by code, those common tool sets (not individual tools),
common TMDE, and special tools, special TMDE, and special support equipment required to perform the
designated function.
Remarks Code. When applicable, this column contains a letter code, in alphabetical order, which is keyed to the
remarks.
0039 00-5
