TM 9-2350-256- 10(c)Place six grenades into each ammunition storage bin on each side of hull.(d)Load six grenades in each discharger. Insert grenades, base first, into discharger barrel. Push hardon top of grenade with palm of hand and rotate 1/4 to 1/2 turn while pushing on grenade. This willensure that spring clip at base of grenade is engaged with pin in bottom of discharger barrel andensure electrical contact.WARNINGDo not fire grenades into strong head wind or while moving rapidly forward.(5)Firing. Turn on vehicle MASTER switch. Lift arming switch switch-guard (6) and place arming switch (6) inDOWN position. When power-on lamp (7) is lit, push LEFT (3), RIGHT (4), or both pushbuttons (3 or 4) ongrenade launcher pushbutton unit (2) as mission requires.(6)Reloading. Ensure arming switch (6) is off. Ensure all discharger barrels are clear. If grenades are still indischarger refer to paragraph 2-13c(8). If discharger barrels are clear, load dischargers with grenades fromtwo grenade stowage boxes. (A crew member must move outside vehicle to reload dischargers.)2-169
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
