Hydraulic Controls

TM-9-2350-256-10 Carrier Cargo Tracked 6-Ton M548A1 (2350-01-096-9356) Manual
Page Navigation
20

TM 9-2350-256-10 2-1. DRIVER'S CONTROLS AND INSTRUMENTS-Continued. b. Hydraulic Controls. NOTE · Callout numbers (1) thru (7) in illustration below correspond with steps (1) thru (7). · Refer to paragraph 2-1e for United States Army Europe (USAREUR) turn signal (1) BOOM operating lever (1). Used to move boom up or FORWARD, HOLD, or RETRACT-STOW. Spring loaded to stay in HOLD. (2) SPADE operating lever (2). Used to RAISE, LOWER, and HOLD spade. Spring loaded to stay in HOLD position. (3) SYSTEM SELECTOR control lever (3). Selects auxiliary (AUX) and MAIN hydraulic systems. REFUEL position for refuel-defuel operations. It locks in desired position. (4) MAIN WINCH operating lever (4). Selects PAYOUT, HOLD, and INHAUL of main cable. Spring loaded to stay in HOLD position. (5) POWER control lever (5). To turn main hydraulic pump ON or OFF. It locks in desired position. (6) BOOM SAFETY control lever (6). Selects STOW or LIVE. Spring loaded to stay in LIVE position. 2-4

Privacy Statement
Press Release
Contact