TM 9-2350-256-10 Table 2-1.  PMCS-Continued. Location Crewmember Not Fully Item Item to Mission No. Interval Check/ Procedure Capable if: Service 7 Before Driver's b. Observe normal Cont. Instrument readings and Panel operation of gages and warning lights. c. Check ENGINE oil c. Operating temperature gage (1). above 240F Normal temperature (115C). range 140 to 240F (60 to 115C). d. Check ENGINE oil d. Pressure reads pressure gage (2). below 40 psi Normal pressure 40 to (276 kPa) or 70 psi (276 to 483 above 70 psi kPa) at 2400 rpm, (483 kPa). 180F (82C) oil temperature. e. Check e. Indicator TRANSMISSION oil remains in red temperature gage (3). with the main Normal operating engine range 160 to 280F running. (71 to 138C). f. Check TRANS- f. Pressure reads MISSION oil pressure below 15 psi gage (4).  Normal (103 kPa) or pressure 15 to 19 psi above 19 psi (103 to 131 kPa). (131 kPa). g. Check battery- g. Indicator generator indicator (5). remains in red Normal reading green with main zone for generator; engine yellow for battery. running. h. Check tachometer (6) h. Tachometer and speedometer (7).   not operating. Both should operate normally without excessive fluctuations or unusual noise. 2-52