engine oil level(engine running)

TM-9-2350-256-10 Carrier Cargo Tracked 6-Ton M548A1 (2350-01-096-9356) Manual
Page Navigation
76

TM 9-2350-256-10 Table 2-1. PMCS-Continued. Location Crewmember Not Fully Item Item to Mission No. Interval Check/ Procedure Capable if: Service 17 After Engine Oil Driver Level (Engine a. Set parking brake and a. Vehicle will Running) shift lever in P start in gears position. Start engine. other than P. Run engine at 1000 to 1200 rpm until engine temperature gage reads 140 to 240F (60 to 116C). Reduce engine idle to 675 to 725 rpm. b. Remove gage rod b. Any class III oil (dipstick) from tube. leak. Wipe rod. Reinsert dipstick and remove. Add oil (Appx. D, item 27 or 28) as required to bring level up to FULL mark on rod. 18 After Transmis- Driver sion Oil Level WARNING (Engine Transmission may be Running) hot after operation. Use caution when reaching into engine/transmission compartments. NOTE If vehicle has been operating for a period of time sufficient to warm oil to 180 to 200°F (82 to 93C), oil level should be at or slightly above FULL mark due to the expansion of the oil. 2-60

Privacy Statement
Press Release
Contact