TM 9-2350-256-20-1
0097 00
14. Service brake linkage shaft. Each time main engine is removed, lubricate shaft with GAA through fitting (27).
15. Service brake linkage lever. Each time main engine is removed, lubricate lever with GAA through two fittings (28).
16. Shifting linkage bell crank. Each time main engine is removed, lubricate with GAA through five fittings (29).
17. Rear boom lever cylinder pins.
a.
Open engine grilles (30) and remove stoplight plate (31).
b.
Lubricate with GAA through front fittings (32) (accessible through grille) and rear fittings (33) (through stoplight
access).
c.
Install stoplight plate (31) and close engine grilles (30).
0097 00-36
