TM 9-2350-256-20-2
0157 00
Assembly
1.
Insert speedometer (44) and tachometer (45) through front of gage panel (8). Install speedometer and tachometer using
bracket (48), two nuts (46), and two lockwashers (47) for each.
2.
Assemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).
3.
Install fuel selector switch (40) and fuel selector switch instruction plate (41) to gage panel (8) using two screws (42) and
two lockwashers (43). Connect three connectors (39) to fuel selector switch.
4.
Install ID plates (35, 36, and 37) using two drivescrews (38) for each.
5.
Install battery generator indicator meter (24), engine oil temperature gage (27), engine oil pressure gage (28), fuel tank level
gage (29), transmission oil temperature gage (30), and transmission oil pressure gage (31) through front of gage panel (8).
6.
Install six clamps (32) using two lockwashers (34) and two nuts (33) for each.
NOTE
Battery generator indicator meter (24) has only one connector.
7.
Connect connector (25) to battery generator indicator meter (24) and two connectors (26) to each indicating meter (27
through 31).
0157 00-6
