TM 9-2350-256-20-2
0207 00
20. Install four connectors (3, 4, 5, and 6) to generator (35) using two flat washers (37) and two nuts (36).
21. Connect connector (2) to transmission oil pressure sending unit (34).
22. Connect connector (1) to engine disconnect (30) using four screws (31), four lockwashers (32), and four nuts (33).
23. Install seven clamps (28) using screw (29) for each.
NOTE
Follow-on maintenance: Install powerplant (see WP 0098 00).
END OF WORK PACKAGE
0207 00-12
