TM 9-2350-256-20-2
0216 00
5.
Disconnect connector (4) from front signal light (11).
Disassembly
1.
Disassemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).
Assembly
Assemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).
1.
Installation
1.
Connect connector (4) to front signal light (11).
2.
Connect connector (2) to flasher light (10).
3.
Connect connector (3) to flasher switch (9).
4.
Connect connector (1) to thermal flasher (8).
5.
Install eight clamps (5) using lockwasher (7) and screw (6) for each.
END OF WORK PACKAGE
0216 00-3/4 blank
