TM 9-2350-256-20-2
0229 00
3.
Connect two connectors (5 and 6) to rigger's light selector switch (17).
4.
Connect two connectors (3 and 4) to gage panel to bulkhead wiring harness (15).
5.
Connect connector (2) to switch panel to gage panel and miscellaneous switches wiring harness (infrared night viewer)
(14).
6.
Install 19 clamps (11) using lockwasher (13) and screw (12) for each.
7.
Connect connector (1) to APU control box (10).
NOTE
Follow-on maintenance: Install air cleaner (see WP 0137 00).
END OF WORK PACKAGE
0229 00-5/6 blank
