TM 9-2350-256-20-2
0323 00
Assembly
1.
Install gasket (19) in access door (17).
2.
Install access door (17) on access cover (8) with straight pin (18).
3.
Install lever (14) with three flat washers (16) and three screws (15).
4.
Install packing (12) and setscrew (13) in access cover (8).
5.
Install two brackets (10) with two screws (11).
NOTE
Apply adhesive around tapped holes in mount assembly. Remove excess adhesive from inside of holes
if necessary.
6.
Install access cover (8) on mount assembly (1) with two screws (9).
Installation
1.
Install mount assembly (1) on driver's cab-top door (3) with gasket (2), two self-locking screws (4), plate (5), four screws
(6), and two plates (7).
END OF WORK PACKAGE
0323 00-3/4 blank
