TM 9-2350-256-20-2
0328 00
Assembly
NOTE
Repaint parts as required
1.
Install lubrication fitting (22) on bolt (21).
2.
Install latch (18) in pintle hook (11) with bolt (21), nut (20), and cotter pin (19).
3.
Install latch (13) with straight shaft (14), cotter pin (15), and spring (16).
4.
Install lubrication fitting (17) on straight shaft (14).
5.
Connect chain (10) to cotter pin (15) and pintle hook (11) with screw (12).
6.
Install lubrication fitting (9) in pintle mount (1).
7.
Lubricate towing pintle (4) shaft with GAA lubricant (see WP 0097 00).
8.
Place flat washer (8) on pintle mount (1) and insert towing pintle (4).
9.
Place flat washer (7) over threaded end of towing pintle (4) and secure with slotted nut (6) and cotter pin (5).
10. Grease towing pintle through lubrication fittings (9, 17, and 22) (see WP 0097 00).
NOTE
Assembled towing pintle must turn freely in pintle mount (1).
0328 00-4
