TM 9-2350-256-20-2
0337 00
Installation
1.
Install 10 studs (21) and 10 spacers (22) to door (9).
2.
Install six seals (17) and insulation blanket (18) to door (9) and install six seals (19) to door opening (20) on vehicle.
3.
Install bracket mounting (14) to door (9) with 10 screws (15) and 10 lockwashers (16).
4.
Install two handles (10) to door (9) with two flat washers (13), spring washer (12), and nut (11) each.
5.
Install door (9) to vehicle.
NOTE
Door (9) must be open to set torsion bar (8) and torsion bar support (4).
6.
Install tube (7) and torsion bar (8).
7.
Install torsion bar support (4) with two screws (5) and two lockwashers (6).
8.
Install two lockwashers (2) and two screws (1) to engine deck cover (3). Peen screws.
END OF WORK PACKAGE
0337 00-3/4 blank
