TM 9-2350-256-20-2
0387 00
7.
Remove two retaining bars (20) by removing four screws (21) and four lockwashers (22). Remove acetylene tank (refer to
TM 9-2350-256-10).
8.
Remove two cylinder bracket assemblies (23) by removing four screws (24) and four lockwashers (25) from each.
9.
Remove four door seal strips (26 and 27).
Installation
1.
Install four door seal strips (26 and 27) (items 3 and 4, WP 0484 00) with adhesive cement.
2.
Install two cylinder bracket assemblies (23) with four lockwashers (25) and four screws (24) in each. Install acetylene tank
(refer to TM 9-2350-256-10).
3.
Install two retaining bars (20) with four lockwashers (22) and four screws (21).
4.
Install two door handles (15) with two latches (19), two flat washers (18), two nuts (17), and two cotter pins (16).
5.
Install bolt cutter retaining clamp (12) with lockwasher (14) and screw (13).
6.
Install two hose retainers (8) with four flat washers (11), four lockwashers (10), and four screws (9).
7.
Install hose rack (5) with three lockwashers (7) and three screws (6).
8.
Install thumbscrew (4).
9.
Install gage straps (2 and 3) and hose retaining strap (1).
END OF WORK PACKAGE
0387 00-3/4 blank
