TM 9-2350-256-20-2
0396 00
9.
Remove APU access cover assembly (see WP 0334 00).
10. Loosen clamp (16).
11. Remove APU cooling air duct (17) by removing three screws (18) and three lockwashers (19).
12. Remove personnel heater exhaust hose assembly (20) by removing four screws (21), four lockwashers (22), gasket (23),
two screws (24), two lockwashers (25), and gasket (26).
Installation
1.
Install personnel heater exhaust hose assembly (20) with four screws (21), four lockwashers (22), gasket (23), two screws
(24), two lockwashers (25), and gasket (26).
2.
Install APU cooling air duct (17) with three screws (18) and three lockwashers (19).
3.
Tighten clamp (16).
4.
Install APU access cover assembly (see WP 0334 00).
5.
Install air circulation ventilator (15), four lockwashers (14), and four screws (13).
6.
Install two saddle assemblies (10) with four screws (11) and four lockwashers (12).
7.
Install personnel heater (5) using two clamps (9). Do not tighten clamps.
0396 00-3
