REMOVAL - TM-9-2350-256-20

REPLACE/REPAIR STARTER SWITCH WIRING HARNESS (116712261)

REPLACE/REPAIR ENGINE WIRING HARNESS (DUAL VOLTAGE) (11672416)

TM-9-2350-256-20 Carrier Cargo Tracked 6-Ton M548A1 (2350-01-096-9356) M548A3 2350-01-369-6081 Manual
Page Navigation
679

TM 9-2350-256-20 CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS 6-57 REPLACE/REPAIR STARTER SWITCH WIRING HARNESS (116712263- Continued a. REMOVAL 1 Disconnect connector (1) from starter switch (6). 2 Disconnect connector (2) from circuit breaker (7). 3 Remove connector (3) from main switch panel outlet (8) by removing four screws (9) and four nuts (10). 4 Disconnect connector (4) from fuel pump switch (11). 5 Disconnect connector (5) from fuel shutoff switch (12). b. DISASSEMBLY Disassemble wiring harness (see Chapter 6, Section VII). c. ASSEMBLY Assemble wiring harness (see Chapter 6, Section VII). d. INSTALLATION 1 Connect connector (5) to fuel shutoff switch (12). 2 Connect connector (4) to fuel pump switch (11). 3 Install connector (3) to main switch panel outlet (8) using four nuts (10) and four screws (9). 4 Connect connector (2) to circuit breaker (7). 5 Connect connector (1) to starter switch (6). NOTE Follow-on maintenance: Install main switch panel (see paragraph 6-10) 6-138

Privacy Statement
Press Release
Contact