TM 9-2350-256-20CHAPTER 8: MAINTENANCE OF SUSPENSION SYSTEM8-8 REPLACE COMPENSATING IDLER ARM ASSEMBLY WHEELS, HUB ASSEMBLY, LINKS, AND LINKBEARINGS--Continued3 Remove six screws (6), six lockwashers (7), access cover (8), gasket (9), spring (10), nut (11), two washers(12 and 13), round nut (14), cone and roller (15), and hub (16).4 Remove eight screws (17), eight lockwashers (18), seal assembly (19), gasket (20), and cone and roller (21)from hub (16).5 Remove inner roller cup (22) from hub (16) using remover, replacer, and handle.6 Remove outer roller cup (23) from hub (16) using remover, replacer, and handle.7 Remove spacer (24) from compensating idler arm (25).8 Disconnect idler link (26) from compensating idler arm (25) by removing cotter pin (27), nut (28), washer(29), and clevis pin (30).9 Disconnect opposite end of idler link (26) from roadwheel arm (31) by removing cotter pin (32), nut (33),washer (34), and clevis pin (35).10 Remove idler link bearing (36) from idler link (26) using puller.8-26
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business