CHAPTER 9: MAINTENANCE OF HULL - AND CAB-RELATED COMPONENTS
TM 9-2350-256-20
9-12 REPLACE/REPAIR REAR CENTER FLOOR PLATE
THIS TASK COVERS
a. Removal
b. Disassembly
c. Assembly
d. Installation
INITIAL SET-UP
Tools:
Parts:
Equipment Condition:
Tool kit, general mechanic's
Lockwashers (6) (Appendix G,
Mechanic's seat removed (see
(Appendix C, item 53)
item 118)
paragraph 9-67)
a. REMOVAL
Remove four screws (1), four lockwashers (2), four flat washers (3), and floor plate (4).
b. DISASSEMBLY
Remove two screws (5), two flat washers (6), and two lockwashers (7) from mechanic's seat door (8).
c. ASSEMBLY
Secure mechanic's seat door (8) with two new lockwashers (7), two flat washers (6), and two screws (5).
d. INSTALLATION
Install floor plate (4) with four flat washers (3), four new lockwashers (2), and four screws (1).
NOTE
Follow-on maintenance:
Install mechanic's seat (see paragraph 9-67)
9-14