TM 9-2350-256-34
0027 00
5.
Install bracket (54) with control linkage attached.
6.
Position control cable (53) and install two clamps (52), lockwashers (51), and screws (50).
7.
Tighten two jamnuts (49).
8.
Install pin (48) and two cotter pins (47).
9.
Connect valve and fuel line (46) and tighten nut (45) (hidden).
10. Install bracket (44), six lockwashers (43), and screws (42).
11. Install support (41) with control linkage attached, three lockwashers (40), screws (39), lockwashers (38), and screws (37).
12. Install lockwasher (36) and screw (35).
13. Connect brake rod (34) and install lockwasher (33) and screw (32).
14. Connect throttle (31) and install lockwasher (30) and screw (29).
15. Install ground strap (28), three lockwashers (27), and nuts (26).
16. Connect brake control rod (25) and install pin (24) and cotter pin (23).
17. Install brake control rod (5), pin (22), and cotter pin (21).
0027 00-8
