TM 9-2350-256-34
0063 00
7.
Install two washers (55), lockwashers (54), and screws (53) to rear mounting bracket (56) that is connected to subplate (57).
8.
Install two lockwashers (51) and screws (50) to two bottom front mounting brackets (52).
9.
Connect four hydraulic lines (49) to front.
10. Install two top front mounting brackets (48), four lockwashers (47), screws (46), two lockwashers (45), and screws (44).
11. Connect spade control cable (43), install clevis (42), and tighten two jamnuts (41).
12. Install pin (40) and two cotter pins (39).
0063 00-22