TM 9-2350-256-34
0065 00
Removal
1.
Remove four screws (1), lockwashers (2), and floor support (3). Discard lockwashers.
2.
Loosen two screws (4) and remove two clamps (5) from universal boot (6).
3.
Disconnect cable (7) at sending unit (8).
4.
Disconnect seven hydraulic and fuel lines (9).
5.
Disconnect and remove two fuel lines (10) at tank (11).
6.
Disconnect three hydraulic lines (12).
7.
Pull universal boot (6) out of way, cut lockwire (13), remove four screws (14), lockwashers (15), and disconnect drive shaft
(16). Discard lockwire and lockwashers.
8.
Disconnect two hydraulic lines (17).
9.
Remove four screws (18).
10. Disconnect two hydraulic lines (19).
11. Remove 16 screws (20), lockwashers (21), and disconnect four flange-type hoses (22) including suction line (23) and feed
line (24). Discard lockwashers.
0065 00-2